Easy Homemade Peanut Brittle Recipe | A Spicy Perspective (2024)

FAQs

Why didn't my homemade peanut brittle get hard? ›

The main reason why peanut brittle doesn't get hard and have the crunch we expect is because the sugar was not cooked long enough. The sugar needs to be cooked to what is called the hard crack stage, 300ºF.

Baking soda is also very important at this stage since it reacts to the heat, creating carbon dioxide that aerates the caramel, enabling it to snap when someone bites into it rather than requiring them to gnaw at it until it breaks or pulls apart.

#1 - Store in an airtight container

It should come as no surprise that storing your peanut brittle in airtight containers is one of the best ways to store peanut brittle. Keeping air out helps maintain your brittle's freshness by minimizing the amount of moisture that might come into contact with your sweet treat.

To store: Once it's completely cooled, store peanut brittle in an airtight container at room temperature. Do not refrigerate as the moisture from the fridge will cause the brittle to soften. Store for 6-8 weeks. To Freeze: Peanut brittle can be frozen and stored up to 3 months.

It is important to coat cookie sheets with butter and put in the freezer to get them really cold before you need to pour the brittle. After you pour the candy you should put the pans in the fridge or outside if it is cold, so the brittle will set up quickly and stay fluffy.

What Makes it Brittle? The sugar will be cooked to 300ºF (149ºC)—hard crack stage; which when set up would be hard like a lollipop. But peanut brittle is delicate and you can easily bite into it—how? The secret is in the baking soda.

It uses the most basic of ingredients (sugar, corn syrup, and peanuts). What's important to know is that the corn syrup controls the grain of the brittle so adding too little and you have a grainy textured brittle, while adding too much will result in a stringy and sticky brittle.

Not spreading the mixture thinly enough: If the peanut brittle is too thick (usually because you used too small of a pan), it may not cool and harden properly. Be sure to spread the mixture as thinly as possible in the pan. 4. Humidity: Humidity can affect the hardening process of the peanut brittle.

Those other liquid sugars have impurities that will burn at the higher temperature of making caramel, leading to a bitter-tasting brittle.

You will want the cookie sheet to be non-stick. Use parchment paper, a silicone baking sheet or a greased cookie sheet. Spread the peanut brittle as thin as you can. Immediately add your sea salt.

Does weather affect making peanut brittle? ›

I've learned that brittle is better when made on a cool, dry day. When I've made the candy on a warmer, humid day, it tends to be a stickier brittle. This is because the brittle takes longer to cool, and it reaches a point where it is no longer evaporating moisture into the air.

Adding baking soda when making peanut brittle makes the hot sugar syrup foam, creating lots of tiny air bubbles that give the candy the porous, crispy honeycomb texture it's known for. Why didn't my peanut brittle turn out? If your peanut brittle is light in color and chewy, it was not cooked long enough.

If you do NOT have a thermometer, here's what you do. Take a very small cup of cold water and drop a bit of the mixture in. If it dissolves into the water, it's not ready. Mine took 18 minutes to reach the correct temperature, so around 15 minutes start trying the water test.

Remember human peanut brittle is not safe for dog consumption, so make your pup their own to enjoy!

Quickly stir in butter and baking soda, then immediately pour mixture onto the prepared baking sheet. Quickly use 2 forks to lift and pull the mixture into a 12x14-inch rectangle. Let cool until completely firm, at least 30 minutes. Use a mallet to break peanut brittle into pieces.

So, I Googled Salvaging Undercooked Peanut Brittle and followed Tiffany's helpful instructions to throw the pieces back in the pan, turn the heat up and stir, stir, and stir to a raging boil and wait to pour it in the pan until it reaches 300 degrees.

I started on medium heat, but turned it down to a bit below medium. KEEP STIRRING. While it's still semi solid you MUST keep stirring or it WILL burn. I thought it was never going to turn into a liquid, but of course it did.

The amount of time you cook fudge directly affects its firmness. Too little time and the water won't evaporate, causing the fudge to be soft. Conversely, cook it too long and fudge won't contain enough water, making it hard with a dry, crumbly texture.